Exercises 2

The goal of this exercise is to familiarize the programmer with slightly more advanced features of the ISIS3 API. You will be writing an ISIS3 application that performs simple differences between adjacent pixels in the line or sample directions.

This tutorial assumes that the user has completed exercise 1 and has access to the ISIS installation and data from that tutorial.

Setup

It's advisable to start with the mirror directory from Exercise 1 and copy it to a new directory called diff in base/apps. The rest of the exercise will be use the diff directory as a work area.

1. Set up your environment to run the current public version of ISIS3.
2. Set your current working directory to the "diff" directory created above.

Task 1 - Rename the mirror Application to diff

1. Run make clean.
2. Rename all files to match your new application's name: diff.
3. Edit the XML file to have only the FROM and TO parameters. Ensure they both have appropriate descriptions and add appropriate history documentation.
4. Type make html to check the validity of your XML file. Address any errors.

Task 2 - Modify the IsisMain and Processing Functions

1. Modify the IsisMain and Process functions so they produce a new cube where each pixel is the subtraction of that pixel and its right neighbor. For example, if line 1, sample 1 has a value of 120 and line 1, sample 2 has a value of 153, the output pixel for line 1, sample 1 should be -33.

Task 3 - Add the Ability to Subtract the Left Neighbor

1. Create a new "process" function to subtract each pixel from its left neighboring pixel.
2. Create radio buttons in your XML to allow the user to select between the two modes.
3. Set up an if statement so your software can differentiate between the two modes.

UserInterface can help you get the string value of the radio buttons. It may be useful to look at another application.

Task 4 - Add the Ability to Subtract Lines

1. Create another process function that subtracts lines instead of samples.
2. Edit your XML file to accommodate this new feature.
3. Don't forget make html to test your changes.
4. Don't forget to append to the if statement to accommodate the new mode.

Task 5 - Account for Special Pixels

1. Account for special pixels in the image. If either of the input pixels you are dealing with are special, then the output pixel should be Isis::Null.
2. Ensure you account for special pixels in all modes of the application.

Task 6 - Combine Process Functions

1. Combine all process functions into a single function. Note: This may also require some global variables. Hint: Look at ProcessByLine and other ProcessByXxxxxx.

Task 7 - Verify Results

1. For each mode in diff, compare the output to the original Peaks.cub (available from Exercises 1) using qview. Make sure your software is processing data correctly.
2. Check for special pixels.

Task 8 - Eliminate Global Variables

1. Minimize the use of global variables. Rewrite the program so that it does not rely on global variables. Hint: Look at Isis::ProcessByBrick.

Task 9 - Create Tests for Your New Software

Follow the instructions to add tests for your changes.